Using The File Transfer Monitor - HPE 3PAR StoreServ Software User's Manual

NOTE: If you have Policy Server configured, your options are limited to enabling or disabling
automatic software downloads from HQ.
If you choose to disable remote operations, you will need to manually send the weekly log files to
3PAR HQ in the event that maintenance support is required. These log files are located on the SP in
the /sp/prod/data/files/weekly/ location. You can email the zipped files to
mailto:spweekly@hpe.com or use a file transfer protocol (FTP) site to transfer the files.
To send files to 3PAR HQ using FTP:
1. In a web browser, enter ftp.ext.hpe.com or h2.ext.hpe.com.
2. Log in as the spweekly user.
NOTE: Contact Hewlett Packard Enterprise Support as needed for the spweekly user credentials.
3. Enter bin to select binary file transfer.
4. Enter put followed by the file name to transfer the file.
5. Enter quit to exit the FTP process.

Using the File Transfer Monitor

The HQ File Transfer Monitor feature displays information about the latest (or current) transfer and latest
prior transfer from the SP to the connection portal. This feature is interactive, and after it is initiated, it
must be stopped manually as described in this section. You can start the File Transfer Monitor using
either SPOCC or SPMAINT.
To start the File Transfer Monitor using SPOCC:
1. In the left navigation pane of the SPOCC menu, click SPmaint.
2. Click SP Control/Status.
3. Click File Transfer Monitor. The monitor opens in a new window.
To start the File Transfer Monitor using SPMAINT:
Procedure
1. Log in to the SPMAINT utility.
2. From the SP Main menu, enter 1 for SP Control/Status, then press ENTER.
3. Select option 6, File Transfer Monitor, then press ENTER.
To stop the File Transfer Monitor, on the transfer monitor menu, enter q.
HPE 3PAR Communication Settings 59