Add Vcenter To The Existing Storeserv - HPE 3PAR StoreServ Software User's Manual

8. After you add the storage system, options specific to the storage system are displayed:
• Info—When you click this option, a screen appears that provides configuration information for the
storage system.
• Modify—When you click this option, a screen appears with fields that you can modify as needed to
change the configuration information.
NOTE: In SP 4.4.0 and later, the Serial Number field cannot be modified.
• Remove—When you click this option, a message appears that asks you to confirm that you want to
remove the storage system.
If the Storage system is removed from the SP, all the vCenters added to it are deleted
automatically.

Add vCenter to the existing StoreServ

SPOCC provides an option to add a vCenter to the StoreServ Storage system attached to SP.
Procedure
1. Connect to SPOCC with the SP IP address. Enter the SP IP address into a supported browser and
login with a valid username and password.
2. In the left navigation pane, click SPmaint.
3. Under Service Processor - SP Maintenance, click StoreServ Configuration Management.
4. Click Add vCenter.
StoreServ Configuration Management 39