Introduction; Supported Service Processors; Hpe Proliant Dl120 Service Processor; Dl120 Port Configuration - HPE 3PAR StoreServ Software User's Manual

Introduction

This guide describes how to administer the HPE 3PAR Service Processor (SP) 4.4.0 that accompanies
the HPE 3PAR StoreServ Storage system. The SP offers two user interfaces that enable you to perform
various administrative and diagnostic tasks in support of both the 3PAR storage system and the SP. This
guide explains the functions performed by the SP, shows you how to access both of its user interfaces,
and demonstrates how to perform administrative and diagnostic tasks using those interfaces.
User interface elements, menu items, and command output illustrated in this document are taken from the
most recent version of the SP software. If you have an earlier version, your user experience may vary
from this documentation.

Supported Service Processors

The following SPs are supported with release level 4.4.0.
Service Processor
Virtual Service Processor
Virtual Service Processor
HPE ProLiant
Supermicro

HPE ProLiant DL120 Service Processor

Beginning with the SP 4.3.0 MU3 release, HPE 3PAR supports the use of the HPE ProLiant DL120
Service Processor. This section describes conditions and features of the DL120 Service Processor.

DL120 port configuration

The port configuration for the DL120 differs from the DL320e port configuration.
6 Introduction
Platform enter
Virtual
Virtual
Physical
Physical
Supported models
ESXi 5.0
ESXi 5.1
ESXi 5.5
ESXi 6.0
ESXi 6.5
ESXi 6.7
Hyper-V Server 2008 R2
Hyper-V Server 2012
Hyper-V Server 2012 R2
Hyper-V Server 2016
DL120
DL320e
DL360e
DL360 Gen10
Supermicro II