1. From the SPMAINT main menu, enter 1 for SP Control/Status, then press ENTER.
2. Enter 11 for SP Date/Time/Geographical Location maintenance, then press ENTER.
The following subsections describe how to perform the tasks that are related to each of the functions that
are available through the SP System Date/Time/Geographical Location submenu in SPMAINT.
Changing the Date in SPMAINT
To change the SP date:
Procedure
1. From the SP System Date/Time submenu, enter 1 for Change the Date, then press ENTER.
2. When prompted, enter the new date in YYYY/MM/DD format, then press ENTER.
3. When prompted, enter y, then press ENTER to confirm the date change.
Changing the Time in SPMAINT
To change the SP time:
Procedure
1. From the SP System Date/Time submenu, enter 2 for Change the Time, then press ENTER.
2. When prompted, enter the new time in 24-hour format (HH:MM), then press ENTER.
3. When prompted, enter y, then press ENTER to confirm the time change.
Changing the Time Zone in SPMAINT
If you are altering the time zone setting for the SP, respond to the following guided menus, then press
ENTER to confirm the following information:
•
Continent or ocean
•
Country
•
Time zone region
Verify or set the date and time before continuing.
To change the time zone setting:
Procedure
1. From the SP System Date/Time submenu, enter 3 for Change the timezone, then press ENTER.
2. When prompted, enter y, then press ENTER to launch the time zone configuration sequence.
Managing NTP Configuration
Use the Network Time Protocol (NTP) Configuration submenu in SPOCC to manage the NTP and NTP
server configuration settings (this submenu is called the Manage NTP Configuration [NTPCONF]
submenu in SPMAINT).
20
SP Control/Status Functions