Policy Server Overview; Secure Service Agent Overview; Default User Accounts; Default Sp User Accounts - HPE 3PAR StoreServ Software User's Manual

example, if the 3PAR StoreServ 7000 3PAR serial number is 1601234, the Service Processor ID
will be SP0001601234.
– The literal "SP" string (2 characters) + the Hewlett Packard Enterprise 10-character
alphanumeric StoreServ serial number. For example, if the StoreServ serial number is
HP10SN1234, the Service Processor ID will be SPHP10SN1234. If the StoreServ serial number
is 0123456789, the Service Processor ID will be SP0123456789.
In the figure above, the SP ID is "SP0001400383."
• Menu name—Menu names are not necessarily unique. Menus that are accessible from the same
menu often share the same name as the menu itself.
In the figure above, the menu name is "SP Main."
• Vector key code—A vector key code identifies each menu and submenu and many of the screens
available through SPMAINT. Use these codes to navigate quickly to a specific menu or function.
In the figure above, the vector key code is "1." Submenus are denoted, for example, as "1.1," "1.1.1,"
and so on.
• Transfer media—The Transfer Media field indicates the current method for outbound
communications.
In the figure above, the transfer media is "Ethernet."
• Transfer status—The Transfer Status field indicates the status for the most recent data transfer
transaction.
In the figure above, the transfer status is "OK."

Policy Server Overview

3PAR Policy Server is an optional host-based application that administers the communication policies
between the SP and Collector server. For information about 3PAR Policy Server, see the 3PAR Policy
Server installation and setup guide.

Secure Service Agent Overview

The 3PAR Secure Service Agent (SSA) is a software application that resides on the SP. SSA enables the
communication between the SP and the 3PAR Collector Server. Unlike direct SSH connections to your
SP, with the SSA there is no need to open additional ports on your firewall, because communications are
done with HTTPS.
The 3PAR SSA can be configured to communicate with the 3PAR Policy Server and one or more SPs
within your network as well as with Customer Support at 3PAR Central. The SSA serves as the
centralized communication point for all communications between your site and 3PAR Central. All
diagnostic data transfers and remote service connections that are established through the SSA are
secure and controlled by your network administrators. The SSA is configured for encrypted
communication through the Secure Socket Layer/Transport Layer Security (SSL/TLS) protocols.

Default User Accounts

This section describes the default user accounts that are created during the Moment of Birth (MOB)
operation of the SP and the Out of the Box (OOTB) operation of the storage system.

Default SP User Accounts

During the SP's MOB operation, the following SP user accounts are created:
Overview 15