Managing Date And Time Settings - HPE 3PAR StoreServ Software User's Manual

Procedure
1. On the SPOCC home page, in the left navigation pane, click SPmaint.
2. Click SP Control/Status.
3. Click SP Log Transfer Trigger, then click OK when prompted.
To force a transfer trigger using SPMAINT:
1. From the SPMAINT main menu, enter 1 for SP Control/Status, then press ENTER.
2. From the File/Log Transfer menu, enter 7 for SP File Transfer Trigger, then press ENTER.
The following options appear:
• 1—Transfer SP log
• 2—Take a SPLOR
• 3—Do both 1 and 2
• 4—Transfer a file held for size
• 5—Configure FTP Proxy
3. Enter 1, then press ENTER to confirm the transfer.
To create a Service Processor Log Out Request (SPLOR) and transfer, enter 19, then press ENTER. The
SPLOR creates a diagnostic archive of data related to the SP state and configuration.

Managing Date and Time Settings

You can use SPOCC or SPMAINT to configure the date, time, time zone, and location for the SP.
CAUTION: If you are using a network time protocol (NTP) server, do not change the time setting for
the SP unless the SP is not synchronized with the NTP server.
To manage these settings in SPOCC, use the SP Date/Time/Location submenu:
Procedure
1. On the SPOCC home page, in the left navigation pane, click SPmaint.
2. Click SP Control/Status.
3. Click SP Date/Time/Geographical Location.
4. To configure the date, time, or both, click SP Date/Time Maintenance.
5. Configure the Date, Time, and Timezone fields, then click Update System Date and Time.
6. Click SP DateTimeLoc Menu to return to the SP Date/Time/Geographical Location menu.
7. To configure the geographic location, click Geographical Location (Modem Control).
8. Select your location from the Geographic Location list, then click Update Geographical Location.
To manage these settings in SPMAINT, use the SP System Date/Time submenu:
SP Control/Status Functions 19