Description Of Menu-P.remote Functions - Ikegami HQLM-3120W Operation Manual

HQLM-3120W

4-10 Description of MENU-P.REMOTE Functions

Setting the functions of the parallel remote
pins
Select the pre-assigned pin functions of the
parallel remote control or the individual us-
er-set functions.
* By default, the pre-assigned pin functions are
displayed beneath.
* Refer to "Pin function in default" section in
"Datal 2 Parallel remote pin function."
Setting the user pin function
When USER is selected in
dividual pin functions. The following functions
are available for setting.
For details, refer to "Pin function in default"
section and "Functions added by user setting"
section in "Datal 2 Parallel remote pin func-
tion."
* Refer to "Data 2 Parallel remote pin function"
for details.
V:4K-CH-A1 when input is changed to
CH-A1 in 4k mode
V:4K-CH-B1 when input is changed to
CH-B1 in 4k mode
V:4K-CH-HDMI when input is changed to
HDMI in 4k mode
V:2K-CH-A1 when input is changed to
CH-A1 in 2k mode
V:2K-CH-B1 when input is changed to
CH-B1 in 2k mode
V:2K-HDMI when input is changed to
HDMI in 2k mode
MONO selection of MONO
MARKER marker ON
, set the in-
*
functions
and
"MENU-MARKER"-adjusted shadow level is
forced to go back to the level remotely preset.
* The functions of the following pins, which are
fixed, cannot be changed.
- -
32
SHADOW shadow ON at the level set in
"MENU-MARKER-SHADOW"
SHADOW0 shadow ON at shadow level
0% (Black)
SHADOW20 shadow ON at shadow level
20%
SHADOW40 shadow ON at shadow level
40%
SHADOW60 shadow ON at shadow level
60%
R-TALLY R tally ON
G-TALLY G tally ON
CHR UP CHROMA UP ON
UMARK* USER MARKER SCENE*
ON
SHADOW0 , SHADOW20
SHADOW40 and SHADOW60
Select two or more SHADOW settings at once,
SHADOW0 (Black) is given priority.
When any of these functions is turned ON, the
Pin 1 (P1) : GND
,