Description Of Menu-Tc/Wfm/Vsc Functions - Ikegami HQLM-3120W Operation Manual

31-inch 4k/hd multi format lcd monitor
Table of Contents

Advertisement

HQLM-3120W

4-5 Description of MENU-TC/WFM/VSC Functions

* TC / WFM / VSC is supported for HD/3G/12G SDI signals.
Setting the SDI TC display ON/OFF
Used to turn ON or OFF the VITC/LTC display
multiplexed with the ANC part of the signal.
This function can be assigned to a function
switch on the front panel.
Default setting is OFF.
Setting of SDI TC display brightness
Used to set the SDI TC display brightness in
three levels, LOW, MID and HIGH.
Default setting is MID.
Setting of SDI TC display size
Used to select the SDI TC display size, NORMAL
or LARGE.
Default setting is NORMAL.
Setting of waveform display ON/OFF
Used to turn ON or OFF the waveform display of
luminance signal.
This function can be assigned to a function
switch on the front panel.
Default setting is OFF.
Setting of waveform display brightness
Used to set the waveform display brightness in
three levels, LOW, MID, HIGH and HIGH(M).
HIGH(M) mode displays the picture with WFM
overlay.
Default setting is HIGH.
Setting of waveform display size
The waveform display scale can be set to AUTO,
SDR, HLG, or PQ.
Default setting is AUTO.
Setting of waveform display position
Used to set the waveform display position,
RIGHT or LEFT.
Default setting is RIGHT.
Setting the waveform display color
Used to set the waveform display color, WHITE or
COLOR.
For COLOR settting, it is displayed in the fol-
lowing colors.
<RGB>
<YCbCr>
R : Red
Y ch
G : Green
Cb ch
B : Blue
Cr ch
Default setting is WHITE.
Selection of SIGNAL waveform display CH
Select the waveform channels to display from R,
G, B, RGB, Y, Cb, Cr, and YCrCb.
In the RGB waveform display mode, when the
input terminal signal is YCbCr, the levels may
be displayed out of position due to an operation-
al error of the matrix.
Default setting is Y.
Setting the VSC (VECTOR SCOPE) display
ON/OFF
Used to turn on or off the VECTOR SCOPE dis-
play.
This function can be assigned to a function
switch on the front panel.
Default setting is OFF.
- -
20
: Green
: Blue
: Red

Advertisement

Table of Contents
loading

Table of Contents