Settings" Tab - Roland DWX-4W User Manual

VPanel Window

"Settings" Tab

In this tab, you can configure the VPanel auto-startup settings, settings related to the NC code, and other settings. When more
than one machine is connected, the machine selected in the top window becomes the target for the settings.
NC code with decimal point
Machine ID
Run VPanel at PC start-up
Version
8
1. Operation Screen
Click to display the special
website in your Internet
browser.
Select the handling and interpretation of the decimal point in NC codes. With "Con-
ventional," the unit is interpreted as millimeter (or inch) when there is a decimal
point, and as 1/1000 millimeter (or 1/10000 inch) when there is no decimal point.
With "Calculator," the unit is always interpreted as millimeter (or inch) regardless of
whether there is a decimal point. Select the scope of the application when selecting
"Calculator." Select an appropriate setting according to your CAM or NC code.
 Initial setting: Conventional
You can set an ID to a machine. This is useful when connecting multiple units.
 Initial setting: A
"Setup Guide" ("Connecting Multiple Units")

Important
To change an ID, be sure to follow the procedure explained in the "Setup Guide."
When this is checked, VPanel will start automatically when Windows starts up and
the VPanel icon will be displayed in the task tray.
 Initial setting: Checked
Displays the VPanel version and the firmware of connected machines (the machine
selected in the top window when more than one machine is connected).