Aborting Output
Procedure
CAUTION
Do not insert your hands or other objects into the machine or look into the inside of
the machine with the front cover open until the spindle has come to a complete stop.
If you open the front cover before the spindle comes to a complete stop, an emer-
gency stop will occur. Due to inertia, the spindle will continue to rotate even after
an emergency stop has occurred. It is dangerous to touch a rotating tool. Also, the
coolant continues to flow until the spindle comes to a complete stop. Coming into
contact with sprayed coolant may be hazardous to your health.
Deleting Standby Milling Data
Procedure
In the top window of VPanel, select the machine that has the milling data that you want
to delete.
In the output list, right-click the milling data that you want to delete, and then click [Cancel].
You can only delete standby milling data (milling data that is second from the top or lower in the output list).
In the top window of VPanel, select
the machine for which output will be
aborted.
Click
.
The message shown in the figure will be displayed.
To abort output, click [OK].
Click [Cancel] to not abort the output.
Starting Milling
27
2. Milling