Following Daily Operations; Collet Maintenance - Roland DWX-4W User Manual

Following Daily Operations

Collet Maintenance

Be sure to perform the following tasks after daily operations. These tasks are necessary for maintaining a favorable machine
condition and for ensuring a high level of product quality.
If these tasks are not executed, a message prompting operation will be displayed in VPanel.
Required Tools
Collet replacement jig
Note
Collet maintenance should be completed quickly. This is because a sufficient amount of compressed air must be
supplied while performing the work, and if the work is not completed promptly, the compressed air supply will
be insufficient. If the compressed air can no longer be supplied, an error will occur, which will result in the need
to start the operation over from the beginning.
1.
Remove the collet.

Show VPanel.
 P. 5 "Displaying VPanel"


28
2. Milling
Included items
Collet tap Taper cleaner Collet brush Grease
Select a machine to operate.
Click the radio button to the left of the name of
the machine to operate.
Click in the top window.
The [Settings] screen will appear.
Click the [Maintenance] tab.
Click [Collet maintenance].
Commercially
available item
Dry cloth