Table of Contents
Advertisement
Replacing Consumable Parts
Collet
Collet
replacement jig
Collet tap
Collet
replacement jig
Close the front cover.
54
3. Maintenance
Lightly apply grease to the tapered
portion on the outside of the new
collet.
A thin application is sufficient. Do not apply
excessively.
Assemble the collet, collet replace-
ment jig, and collet tap as shown in the
figure, and then insert this assembly
into the spindle.
While gently pressing the collet tap up
into the hole, rotate the collet replace-
ment jig in the direction indicated in the
figure to tighten the collet.
Keep rotating until the collet replacement jig will
not rotate any more.
The collet will be subjected to com-
pressed air. Be careful to prevent the
collet from falling out.
Attach the collet replacement jig and
the collet tap.
Collet tap
Replacing the collet is complete once the mes-
sage in the figure is displayed.
Click [OK].
Hide quick links:
Advertisement
Table of Contents
