Periodic Care and Maintenance
Filling the Coolant Tank/Replacing the Coolant
Situations Requiring This Work
Filling: When the fluid level in the tank reaches the lower limit.
Replacement: Once a week, or when the work time exceeds 15 hours.
P. 18 "Filling the Coolant Tank/Replacing the Coolant"
46
3. Maintenance
Click the [Maintenance] tab.
Click [Milling bur change test].
Select which milling bur you want
to perform the change test for.
The numbers correspond to the ATC magazine
numbers. This test checks whether the milling bur
set to the selected number can be held correctly.
Click [OK].
When the message shown in the figure appears,
the milling bur change test is complete.
Click [OK].