Step 2: Outputting Milling Data - Roland DWX-4W User Manual

STEP 2: Outputting Milling Data

* You can also use commercial CAM software to output milling data. For information on compatible CAM software, contact
your authorized Roland DG Corporation dealer.
CAUTION
Do not place any electronic devices in the vicinity of this machine.
Because coolant flows within this machine, water may be sprayed on objects in the
vicinity of the machine when its front cover is opened. To prevent malfunctions, do
not place any electronic devices in the vicinity of this machine.
Procedure




Verify that the milling bur has been set.

P. 17 "Preparing a Milling Bur"

Check that the coolant has been set.
 P. 18 "Filling the Coolant Tank/Replacing the Coolant"
In the top window of VPanel, select
the machine to output to.
Click .
The [Output a file] window will appear.
Click [Add].
The [Open] window will appear.
Select the milling data, and click
[Open].
The selected milling data is displayed in the data
list of the [Output a file] window.

Repeat steps to output the milling data
continuously.
Starting Milling
25
2. Milling