Table of Contents
Advertisement
Remove the automatic correction jig.
To check whether the following symptoms have been improved, actually output milling data.
When the milling position is misaligned
When symptoms such as a line of level difference or a hole in the Z direction occurs in the milling results
P. 23 "Starting Milling"
Periodic Care and Maintenance
Click the [Maintenance] tab.
Click [Automatic correction].
The window shown in the figure appears auto-
matically.
Make sure that the work displayed
on the screen is complete.
Click [OK].
Automatic correction starts.
Automatic correction is complete once the mes-
sage in the figure is displayed.
Click [OK].
3. Maintenance
43
Hide quick links:
Advertisement
Table of Contents
