Draining the Coolant Lines ......................................................................................................................................................55
Spindle Run-In (Long) ................................................................................................................................................................57
Attaching the Retainers ............................................................................................................................................................59
4. Troubleshooting ........................................................................................................................... 64
Machine Problems .................................................................................................................... 65
Compressed Air Does Not Come Out ...................................................................................................................................67
Automatic Correction Fails .......................................................................................................................................................67
Water Is Leaking from the Front Cover ................................................................................................................................68
Milling Quality Problems ............................................................................................................ 69
Installation Problems ................................................................................................................. 71
Installing the Driver Separately ..............................................................................................................................................71
Driver Installation Is Impossible .............................................................................................................................................73
Uninstalling the Driver ..............................................................................................................................................................75
Uninstalling VPanel .....................................................................................................................................................................76
Thank you very much for purchasing this product.
To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe location.
Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
The contents of this operation manual and the specifications of this product are subject to change without notice.
The operation manual and the product have been prepared and tested as much as possible. If you find any
misprint or error, please inform us.
Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage which may occur
through use of this product, regardless of any failure to perform on the part of this product.
Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage which may occur with
respect to any article made using this product.
http://www.rolanddg.com/
Company names and product names are trademarks or registered trademarks of their respective holders.
Copyright © 2015-2016 Roland DG Corporation
Roland DG Corporation has licensed the MMP technology from the TPL Group.
3