Milling Machine Correction - Roland DWX-4W User Manual

Milling Machine Correction

The accuracy of the milling machine may vary if it is used for a long period of time or the surrounding environment changes.
Performing automatic correction will correct the rotary axis position.
Situations Requiring This Work
 When replacing the spindle unit
 When the milling position is misaligned
 When symptoms such as a line of level difference or a hole in the Z direction occurs in the milling results
This procedure must be performed by a trained service technician in the following cases.
 When installing the machine in a different location
This work is required not only when installing the machine but also when moving the machine to a different location.
Contact your authorized Roland DG Corporation dealer to perform such work.
Required Tools
Included items
Automatic
correction jig
Make sure to keep the dummy pin for milling and the detection pin for correction
separate and to never mistake which is for milling and which is for correction.
If a detection pin is used for milling even once, it cannot be used to provide proper correction. If for
some reason a detection pin for correction is used for milling, a new detection pin for correction will
be necessary. In such cases, contact your authorized Roland DG Corporation dealer.
1.
Replace the dummy pin for milling with the detection pin for correction.

Show VPanel.

P. 5 "Displaying VPanel"

Commercially available item
Detection pin for
correction
Periodic Care and Maintenance
Dry cloth
Select a machine to operate.
Click the radio button to the left of the name of
the machine to operate.
Click
The [Settings] screen will appear.
in the top window.
3. Maintenance
39