Milling Bur Management" Dialog Box - Roland DWX-4W User Manual

VPanel Window

"Milling bur management" Dialog Box

By selecting a milling bur to be used in this dialog box, the work time of the selected milling bur will be recorded auto-
matically. In addition, when the bur reaches the preset replacement time, a warning message will be displayed. When more
than one machine is connected, the machine selected in the top window is managed.
Milling burs
Work time /
Replacement time
Milling bur registration
12
1. Operation Screen
Here you can select from among the registered milling burs the bur whose work time you
want to count. (#1 to #4 are stocker numbers.)
Select a milling bur according to the milling burs set in the ATC magazine. The name and
work time / replacement time of the selected milling bur will be displayed on the top
window.
When not using this function, leave the box blank.
Displays the work time and replacement time of the selected milling bur. The replacement
time can be changed from "Milling bur registration." After replacing the milling bur with a
new one, click [Reset] to set the work time to 0.
Here you can register milling burs whose work time you want to manage, or remove burs
you no longer want to manage. Click here to open the "Milling bur registration" dialog box.
P. 13 ""Milling bur registration" Dialog Box"
