Mail" Tab - Roland DWX-4W User Manual

VPanel Window

"Mail" Tab

In this tab, you can configure the settings so that you receive a notification e-mail when milling has finished, when an error
has occurred, or when maintenance has finished. When more than one machine is connected, all of the machines become
the targets for the settings.
Check [Use mail notification] to enter each item. For information on the input fields, see the table below.
Receiver address
Sender address
Server host name
Server port number
Use SSL connection
Use SMTP authentication
User name / Password
Click [Send test] to perform a sending test. If an e-mail with the following data is received at the address specified in "Receiver
address," configuration of the settings is complete.
Subject: <Machine name> Body: Test
If the e-mail fails to send, the "Windows Script Host" error window will be displayed. Check the content in the input fields again.
Important
* It may be impossible to send e-mails because of security software settings or the like. If e-mails cannot be sent, check the
settings of the security software being used as anti-virus software or for a similar purpose.
* For detailed information about the e-mail settings, consult your network administrator.
* VPanel does not support TLS connections (STARTTLS).
10
1. Operation Screen
The recipient's e-mail address. You can input more than one address by separating
with a comma.
The e-mail address used for the computer that is currently used to configure VPanel
settings. (This becomes the sender's e-mail address. The address must be one that
can send e-mails via the outgoing server mentioned below.)
The outgoing e-mail server name (SMTP server name) of the e-mail software used
on the computer that is currently used to configure VPanel settings.
The outgoing e-mail server port number of the e-mail software used on the com-
puter that is currently used to configure VPanel settings.
Check to use a security-protected connection (SSL). Configure the settings accord-
ing to the e-mail software being used.
Check to use authentication when sending e-mails. Input the user name and pass-
word for authentication. Configure the settings according to the e-mail software
being used.