Manual Correction" Dialog Box - Roland DWX-4W User Manual

"Manual correction" Dialog Box

In this dialog box, you can directly enter the manual correction values of the milling machine. Perform correction to precisely
adjust accuracy. When more than one machine is connected, the machine selected in the top window becomes the target
for correction.
* Perform automatic correction before performing this correction.
P. 39 "Milling Machine Correction"

Distance
A axis back side
Origin point
Clear these values when executing
the automatic correction
Correct moving distances in the X, Y, and Z directions. Set the correction value
while considering the initial moving distance as 100%.
 Initial setting: 100%
Correct the angle when the A axis is rotated 180 degrees. Set the correction
value while considering the initial setting as 0.00 degrees.
 Initial setting: 0.00 degrees
Correct the origins of the X, Y, and Z axes. Set the correction value while con-
sidering the initial setting as 0.00 mm.
 Initial setting: 0.00 mm
Check to reset the values for "Distance," "Origin point," and "A axis back side"
when performing automatic correction.
 Initial setting: Checked
VPanel Window
1. Operation Screen
11