Table of Contents
Advertisement
Filling the Coolant Tank/Replacing the Coolant
1.
Replace the coolant.
Remove the coolant tank.
Clean the inside of the coolant tank before you replace the coolant.
Pour a little tap water into the tank, and then shake the tank to the left and right. Dispose of any dirty water. Repeat
this step until the water does not become dirty when you shake the tank.
Note
Dispose of coolant properly, in accordance with the laws in effect in your locale. Do not recklessly dispose of it in sewer
systems, rivers, or streams. Doing so may have an adverse impact on the environment.
Preparing for Milling
Open the bottom cover.
Pull out the coolant tank.
Important
Move the coolant tank slowly. Forcefully mov-
ing the coolant tank may cause the coolant
to spray out.
19
2. Milling
Hide quick links:
Advertisement
Table of Contents
