Troubleshooting - Roland DWX-4W User Manual

64

4. Troubleshooting

Machine Problems ...............................................................65
The Machine Does Not Run/Cannot Generate Output .............. 65
The Operation Button Does Not Respond ................................. 65
VPanel Does Not Recognize the Machine................................. 65
No Data Is Being Output to the Machine, or the Machine
Will Not Operate Even Though Data Is Being Output ................ 66
The Computer Shuts Down when Connecting Multiple Machines .. 66
Compressed Air Does Not Come Out ........................................ 67
Automatic Correction Fails ......................................................... 67
The Milling Bur Management Information was Lost................... 67
Collet Maintenance Cannot Continue Due to an Error Occurring .. 68
Water Is Leaking from the Front Cover ...................................... 68
Milling Quality Problems ......................................................69
The Milling Results Are Not Attractive ........................................ 69
There Is a Line of Level Difference in the Milling Results .......... 69
The Dimensions of the Milling Results Do Not Match................ 69
Chipping (Edges of Milling Products Become Chipped) Occurs.. 70
A Hole Opens in the Milling Results........................................... 70
Installation Problems ...........................................................71
Installing the Driver Separately .................................................. 71
Installing the Software and the Electronic Manual Separately... 73
Driver Installation Is Impossible ................................................. 73
Uninstalling the Driver ................................................................ 75
Uninstalling VPanel.................................................................... 76
Responding to Error Messages ...........................................77