Roland DWX-4W User Manual page 61


Attach retainer C.
Insert the retainer straight all the way in.
Slide the retainer to the right so that the mounting part is in the hole on the retainer.

Attach retainer B.
Align the top of the retainer with the area around the spindle head.
While pushing on the top of the retainer, push the bottom of the retainer so that it slides into place.
Be careful not to pinch the silicone portion around the spindle head with the retainer. Doing so
may weaken the secureness of the retainer.

Attach retainer A.
As shown in the figure, push the side of retainer A that is touching retainer B toward the
inside to change the shape of retainer A.
Push the deformed retainer all the way in.
If the retainer is not deformed, it will catch on the uneven area inside the machine and prevent the retainer from
being attached correctly.
Extended Periods of Non-Use / Moving the Machine
Silicone portion
61
3. Maintenance