Leds For The Poe Twisted Pair Ports; Table 6: Leds On The Twisted Pair Ports On The At-Gs924Mx And At-Gs948Mx Switches - Allied Telesis AT-GS924MX Installation Manual

Chapter 1: Overview
LEDs for the PoE
Twisted Pair
Ports
38
Table 6. LEDs on the Twisted Pair Ports on the AT-GS924MX and
LED State
Solid Green
Flashing
Green
Link/
Activity
Solid Amber
LED
Flashing
Amber
Off
Duplex Solid Green
Mode
Solid Amber
LED
Flashing
Amber
The PoE twisted pair ports on the AT-GS924MPX and AT-GS948MPX
Switches have two LEDs that display link, activity and PoE information.
The LEDs are shown in Figure 9 on page 39.
Note
The duplex mode information for the ports on the AT-GS924MPX
and AT-GS948MPX Switches is available from the management
software.
AT-GS948MX Switches
Description
A port has established a 1000 Mbps link to
a network device.
A port is transmitting or receiving data at
1000 Mbps.
A port has established a 10 or 100 Mbps
link to a network device.
A port is transmitting or receiving data at 10
or 100 Mbps.
A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.
A port is operating in full-duplex mode.
A port is operating in half-duplex mode.
Collisions are occurring on a port.