Cabling the Line Ports and Completing the
Installation
Revised: September 17, 2012, OL-26790-01
Introduction
This chapter provides instructions for cabling the Gigabit Ethernet ports and for configuring Gigabit
Ethernet (GBE) interface parameters.
When installing an External Optical Bypass module, the SCE 1000 line ports are connected to the
Note
module. See the External Optical Bypass Module for complete instructions.
•
•
OL-26790-01
Connecting the Line Ports to the Network, page 6-2
How to Load and Activate a Service Control Application, page 6-8
C H A P T E R
Cisco SCE 1000 2xGBE Installation and Configuration Guide
6
6-1