Information About Preparing To Install The Sce 1000 Platform; Tools And Parts Required - Cisco SCE 1000 Installation And Configuration Manual

Information About Preparing to Install the SCE 1000 Platform

Information About Preparing to Install the SCE 1000 Platform

Before installing your SCE 1000 platform, you should consider the power and cabling requirements that
must be in place at your installation site, the equipment you need to install the platform, and the
environmental conditions your installation site must meet to maintain normal operation. This section
guides you through the process of preparing for your SCE 1000 platform installation and the installation
in a rack. The section contains the following topics:
•
•
Figure 4-1
1
3.47 in.
Table 4-1
Dimension
Height
Width
Depth
Weight

Tools and Parts Required

The SCE 1000 chassis is fully assembled at the factory, including the application and software packages.
No assembly is required. However, you need the following tools and equipment to install the SCE 1000
chassis and the rack-mount kit (if installing the SCE 1000 platform in a rack), fan modules, and power
supplies:
•
•
•
•
•
•
Cisco SCE 1000 2xGBE Installation and Configuration Guide
4-2
Tools and Parts Required, page 4-2
Information About Site Requirement Guidelines, page 4-3
SCE 1000 Dimensions
PW R A
PW R B
MN G 1
MN G 2
CO NS OL
E
AU X
LIN K/
10/1 00/
ACT IVE LIN K/
100 0 10/1 00/
ACT IVE
100 0
17.3 in.
2
SCE 1000 Dimensions
Number 1 and 2 Phillips screwdriver
1/4 inch flat-blade screwdriver
#¼" Hex Wrench
Screws compatible with your rack (for mounting the SCE 1000 to the rack)
12 AWG or 2.5-mm copper installation wire with hex or loop connectors for DC power leads
Ring terminals must be UL approved and suitable for 12 AWG wire.
Level (optional)
STA TU S
BY PAS S
C is co S
C E 1 0 0 0
Se rie s
LIN K RX 2 xG B E
TX
LIN K RX
TX
RX
MM
TX
RX
MM
TX
GB E-1
SU B
LIN E
NE T
Measurement
3.47 inches (9.5 cm)
17.4 inches (4.43 cm)
18 inches (4.6 cm)
33 lb (15 kg)
Chapter 4 Installation and Maintenance
17.7 in.
3
OL-26790-01