Examples - Cisco SCE 1000 Installation And Configuration Manual

Step 10: Completing and Saving the Configuration
Apply and save the configuration.
Step 3
You are asked whether to apply and save the configuration.
Apply and Save this configuration? [yes/no]:
To apply and save the configuration, type y and press Enter.
Setup procedure aborted, no configuration changes made.
If the setup is aborted, the dialog is ended.
Confirm saving and applying the configuration.
Step 4
If there are no errors, the system requests confirmation of either a yes or no answer, to prevent mistakes.
Type the appropriate answer (y or n) and press Enter.
The running configuration would be overwritten by the changes you have just entered, are
you sure? [yes/no]:
The selected action is carried out by the system.
The selected action is carried out by the system.
If the apply and save action is not confirmed (no), the setup is aborted.
Setup procedure aborted, no configuration changes made.
If the apply and save action is confirmed (yes), the configuration is applied and saved.
The new running configuration will be saved to the startup configuration.
Step 5 Save the configuration to a remote location.
If the configuration was applied and saved, you may also save a backup copy to a file at a remote station.
Do you want to save a copy of the startup configuration file in a remote station? [no]:
To save the configuration to a remote station, type y and press Enter.
The system will ask for FTP path:
Enter a full FTP path of the remote destination:
This completes the procedures for initial configuration of the SCE 1000 platform.
Step 6
The system informs you that the configuration is complete.
Committing configuration...
Configuration completed successfully.
Saving configuration...
Writing general configuration file to temporary location...
Backing-up general configuration file...
Copy temporary file to final location...
Done!

Examples

•
•
•
Cisco SCE 1000 2xGBE Installation and Configuration Guide
5-24
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Example 1:, page 5-25
Example 2:, page 5-25
Example 3:, page 5-25
OL-26790-01