Functionality - Cisco SCE 1000 Installation And Configuration Manual

Functionality

Functionality

The SCE 1000 can serve one of two general functions:
•
•
Cisco SCE 1000 2xGBE Installation and Configuration Guide
3-4
Monitoring and Control—The SCE 1000 monitors and controls traffic flow. Decisions are enforced
by the SCE 1000 depending on the results of the monitoring functions of the SCE 1000 and the
configuration of the Service Control Application for Broadband or Mobile solution.
To perform control functions, the SCE 1000 must be physically installed as an inline installation and
the connection mode must be "inline".
Monitoring only—The SCE 1000 monitors traffic flow, but cannot control it.
Either an inline installation or an optical splitter installation may be used for monitoring only. In the
latter case connection mode must be "receive-only".
Chapter 3 Information About Topology
OL-26790-01