Chapter 5 Connecting The Management Interfaces And Performing Initial System Configuration; Introduction - Cisco SCE 1000 Installation And Configuration Manual

Connecting the Management Interfaces and
Performing Initial System Configuration
Revised: September 17, 2012, OL-26790-01

Introduction

This chapter explains how to connect the SCE 1000 platform to a local console and perform the initial
system configuration via the setup wizard that runs automatically.
Additionally, this chapter contains instructions for cabling the Fast Ethernet Management interfaces.
•
•
•
OL-26790-01
How to Set Up the Local Console, page 5-2
Perform the Initial System Configuration, page 5-4
Connecting the Management Interface, page 5-26
C H A P T E R
Cisco SCE 1000 2xGBE Installation and Configuration Guide
5
5-1