Cisco SCE 1000 Installation And Configuration Manual page 131

Chapter 8 Troubleshooting
Viewing the User Log
This command is not recommended when the user log is large. Copy a large log to a file to view it (see
Note
Copying the User Log to an External Source, page
From the SCE 1000# prompt, type more user-log and press Enter.
Step 1
The user log appears, followed by the SCE 1000# prompt.
Clearing the User Log
You can clear the contents of the user log at any time. The user log contains important information
regarding the functioning of the system. It is recommended that a copy be made before the log is cleared.
From the SCE 1000# prompt, type clear logger device user-file-log and press Enter.
Step 1
The system asks Are you sure?
Step 2
Type y and press Enter.
Step 3
The SCE 1000# prompt appears.
Viewing the User Log Counters
There are two types of log counters:
•
•
Step 1 From the SCE 1000# prompt, type show logger device user-file-log counters and press Enter.
The logger lines information appears, followed by the SCE 1000# prompt.
How to View the Non-volatile Logger Counters For Both the User Log File and the Debug Log File
From the SCE 1000# prompt, type show logger nv-counters and press Enter.
Step 1
The non-volatile log counter information appears, followed by the SCE 1000# prompt.
OL-26790-01
User log counters—Count the number of system events logged from the SCE platform last reboot.
Non-volatile counters—Are not cleared during boot time
8-14.)
Cisco SCE 1000 2xGBE Installation and Configuration Guide
Logging System
8-15