Information About Management And Collection; Network Management - Cisco SCE 1000 Installation And Configuration Manual

Information About Management and Collection

Information About Management and Collection
The Cisco Service Control solution includes a complete management infrastructure that provides the
following management components to manage all aspects of the solution:
•
•
•
These management interfaces are designed to comply with common management standards and to
integrate easily with existing OSS infrastructure
Figure 1-2
Aggregation
device

Network Management

Cisco provides complete network FCAPS (Fault, Configuration, Accounting, Performance, Security)
Management.
Two interfaces are provided for network management:
•
•
Cisco SCE 1000 2xGBE Installation and Configuration Guide
1-6
Network management
Subscriber management
Service Control management
SCE Platform Management Interfaces
Network
management
Collection
Manager
CLI and SNMP
RDRs
MNG 1
MNG 2
LINK/ 10/100/
ACTIVE 1000 ACTIVE LINK/ 10/100/
Command-line interface (CLI)—Accessible through the Console port or through a Telnet
connection, the CLI is used for configuration and security functions.
SNMP—Provides fault management (via SNMP traps) and performance monitoring functionality.
(Figure
Service
policy and quota
management
XML/RPC
Subscriber info
PWR A
PWR B STATUS
BYPASS Cisco SCE
CONSOLE 2000
AUX LINK RX TX 4xGB E Series
LINK RX TX
1000 LINK RX
TX LINK RX
RX MM TX TX
RX MM TX
RX MM
TX RX MM
SUB GBE-1 TX
LINE NET
GBE-2
SUB LINE/CASCA DE NET
SCE platform
Chapter 1 General Overview
1-2).
Provisioning
system
Subscriber
Manager
DHCP
or RADIUS
Router
OL-26790-01