Example - Cisco SCE 1000 Installation And Configuration Manual

Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Passwords are needed for all authorization levels in order to prevent unauthorized users from accessing
Note
the SCE 1000. Admin level should be used by the network administrator. Root level is for use by Cisco
technician.
Passwords must meet the following criteria:
•
•
•
•
Passwords are case sensitive.
Note
The default password for all levels is "Cisco".
Note
Configure the User password
Step 1
The default User password is displayed.
•
•
Configure the Admin password.
Step 2
The default Admin password is displayed.
•
•
Configure the Root password.
Step 3
The default Root password is displayed.
•
•
Configure password encryption. By default, password encryption is not enabled.
Step 4
•
•

Example

Following is an example of changing all passwords. Password encryption is not enabled (default).
Enter a User password [Cisco]: userin
Enter an Admin password [Cisco]: mng123
Enter a Root password [Cisco]: cistech
Enable passwords encryption? [no]:
OL-26790-01
Minimum length — 4 characters
Maximum length — 100 characters
Begin with an alpha character
May contain only printable characters
To accept the displayed value, press Enter.
To change the value, type the desired string and press Enter.
To accept the displayed value, press Enter.
To change the value, type the desired string and press Enter.
To accept the displayed value, press Enter.
To change the value, type the desired string and press Enter.
To disable password encryption, press Enter.
To enable password encryption, type y and press Enter.
Cisco SCE 1000 2xGBE Installation and Configuration Guide
Step 3: Setting the Passwords
5-9