Cisco SCE 1000 Installation And Configuration Manual page 71

Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
dialog is entered.
Step 5
--- System Configuration Dialog ---
At any point you may enter a question mark '?' followed by 'Enter' for help.
Use ctrl-C to abort configuration dialog at any prompt.
Use ctrl-Z to jump to the end of the configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Would you like to continue with the System Configuration Dialog? [yes/no]: y
Type y and press Enter. The system configuration dialog begins.
Step 6
OL-26790-01
Cisco SCE 1000 2xGBE Installation and Configuration Guide
How to Set Up the Local Console
5-3