Introduction - Cisco SCE 1000 Installation And Configuration Manual

Installation and Maintenance
Revised: September 17, 2012, OL-26790-01

Introduction

This chapter explains how to install a SCE 1000 platform in a rack or in a general tabletop or workbench
installation. Additionally, this chapter contains instructions for installing or replacing the power supply
units and fan modules.
Before you install, operate, or service the system, read the
Information for the Cisco Service Control Engines
information you should know before working with the system.
•
•
•
•
•
•
•
OL-26790-01
Information About Preparing to Install the SCE 1000 Platform, page 4-2
Installing the SCE 1000 Platform, page 4-5
Removing and Replacing a Power Supply Unit, page 4-15
How to Replace the Power Supply Unit, page 4-20
Reconnecting the Power, page 4-21
Fan Module Overview, page 4-24
How to Replace the Battery, page 4-26
C H A P T E R
Regulatory Compliance and Safety
(SCE). This guide contains important safety
Cisco SCE 1000 2xGBE Installation and Configuration Guide
4
4-1