How To Mount The System To The Rack - Cisco SCE 1000 Installation And Configuration Manual

Rack-Mounting a SCE 1000 Platform
Insert and tighten two screws to the Back posts of the rack
Step 4
Figure 4-9
Repeat steps 2 through 4 on the other side of the rack, keeping the brackets flush against the posts and
Step 5
parallel to the supporting bracket on first side of the rack.

How to Mount the System to the Rack

When the appropriate mounting brackets are securely installed, the SCE 1000 can be installed into the
rack.
Make sure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the brakes are
Step 1
engaged or that the rack is otherwise stabilized.
Position the SCE 1000 so that the front end is closest to you, and lift it carefully to place it into the rack.
Step 2
To prevent injury, avoid sudden twists or moves.
Cisco SCE 1000 2xGBE Installation and Configuration Guide
4-10
Attaching the Cross Rails to the Rack
1
Chapter 4 Installation and Maintenance
(Figure 4-9).
2 3
OL-26790-01