Change Step Program: Flsp(183) - Omron SYSMAC CV Series Operation Manual

Memory Card Instructions

5-34-4 CHANGE STEP PROGRAM: FLSP(183)

Ladder Symbol
(183)
FLSP
Variations
j FLSP(183)
Description
402
MSB
CIO 0500 0 0 0 0
CIO 0501 4 1 4 2
CIO 0502 4 3 4 4
CIO 0503 2 0 2 0
CIO 0504 2 0 2 0
Operand Data Areas
N: Step number
N C
C: 1
When the execution condition is OFF, FLSP(183) is not executed. When the ex-
ecution condition is ON, FLSP(183) reads the step program file specified in C+1
to C+4 ( filename .SFC) from the Memory Card and writes the data over the step
indicated by N, changing the contents of the action block. The step program file
must be written to the Memory Card beforehand with the CVSS.
A step that is active or that contains actions that are still being executed cannot
be changed. Also, the number of actions in the new step must be the same as the
number in the step that is being overwritten.
The contents of C must be all zeros to indicate the Memory Card and the file
name is specified in C+1 to C+4 as shown in the following table. If the filename is
less than 8 characters long, enter #20 for the bytes that aren't required. It is not
necessary to input the filename extension ".SFC." It is assumed.
Word Bit(s)
C 00 to 15 OFF to indicate the Memory Card.
C+1 08 to 15 First character in name
C+2 08 to 15 Third character in name
C+3 08 to 15 Fifth character in name
C+4 08 to 15 Seventh character in name 00 to 07 Eighth character in file
LSB
Overwrite
"A," "B"
"C," "D"
CIO, G, A, T, C, #, DM, DR, IR
st
control word CIO, G, A, T, C, DM
Function Bit(s)
00 to 07 Second character in name
00 to 07 Fourth character in file
00 to 07 Sixth character in file
Section 5-34
Function