Omron SYSMAC CV Series Operation Manual page 406

Ladder diagrams

Hide thumbs Also See for SYSMAC CV Series:

Table of Contents

Data Tracing

made will be recorded as the trace memory (negative delay), or that more sam-

ples will be made before they are recorded (positive delay). The sampled data is

written to trace memory, jumping to the beginning of the memory area once the

end has been reached and continuing up to the start marker. This might mean

that previously recorded data (i.e., data from this sample that falls before the

start marker) is overwritten (this is especially true if the delay is positive). The

negative delay cannot be such that the required data was executed before sam-

pling was started.

Trace memory

Trace Trigger Bit

Indicates trace is

in progress.

Indicates trace is finished.

Start tracing

Tracing Flag

Trace Completed Flag

Trace Start Monitor Flag

A00812 turns ON and the

trace is complete when

enough data to fill trace

memory has been sampled.

*Negative delays cannot be such that the

requested data was executed before the

sampling started.

Section 5-33

Show Quick Links

Chapters

Table of Contents

Cv2000 Cvm1 Cv500 Cv1000