File Transfer Between The Cpu And Memory Card - Omron SYSMAC CV Series Operation Manual

Memory Cards
Removing a Memory Card
1, 2, 3...

2-3-2 File Transfer between the CPU and Memory Card

Memory Card Files
26
4. Close the cover.
Memory Card
ON/OFF switch
Memory Card
eject button
Memory Card
1. Open the cover of the Memory Card compartment.
2. Press the Memory Card ON/OFF switch once if the Memory Card indicator
is lit. The Memory Card indicator will turn OFF.
3. Press the Memory Card eject button. The Memory Card will be released al-
lowing it to be removed.
4. Pull out the Memory Card.
5. Close the cover.
Note 1. Do not expose the Memory Card to high temperature, humidity, or direct
sunlight.
2. Do not bend the Card or subject it to shock.
3. Do not apply excess force to the Card when inserting or removing it.
4. Do not remove the Card while the Memory Card indicator is lit; doing so may
result in data errors in the memory.
Data files can be transferred between the Memory Card and PC data areas with
the FILR(180) and FILW(181) instructions. A program file can be transferred
from the Memory Card with FILP(182) or FLSP(183) to change the program dur-
ing operation. Refer to details on these instructions later in the manual.
Memory Card files are identified by both their filename and filename extension.
The following table lists the filenames and filename extensions that are used
with the PC. Filenames are eight characters long and recorded in ASCII. If fewer
than eight characters are needed, enter spaces (ASCII 20) in the remaining by-
tes.
Extended PC Setup
Data files
Ladder program files (files saved with the partial save
operation)
SFC program files (one step)
Program file (complete program)
Extended PC Setup
Program file (complete program transferred at start-up)
Note 1. Extended PC Setup includes the PC Setup, I/O table, routing tables, data
link tables for data links in SYSMAC LINK and SYSMAC NET Link Systems,
Cover
Type of file
1
1
(transferred at start-up)
Section 2-3
Memory Card indicator
Filename
filename .STD
filename .IOM
filename .LDP
filename .SFC
filename .OBJ
AUTOEXEC.STD
AUTOEXEC.OBJ