Preparation And Use - Beckman Coulter J-Lite JLA 16.250 Instruction Manual

J-Lite JLA-16.250 Rotor

PREPARATION AND USE

1
Validation of microbiological containment was done at an independent third-party testing facility (CAMR, Porton Down, UK, or USAMRIID,
Ft. Detrick, MD, U.S.A.). Improper use or maintenance may affect seal integrity and thus containment.
6
The dual-locking lid assembly allows the rotor to be loaded into and
removed from the centrifuge with the lid secured. The rotor may be
placed under a safety hood before the lid is secured or removed. The
JLA-16.250 rotor with dual-locking lid was tested
containment of microbiological aerosols under normal operating
conditions of the associated Beckman Coulter centrifuge, when used
and maintained as instructed. The rotor is also available with a single-
locking lid.
The JLA-16.250 rotor has a patented fluid-containment annulus,
located below the O-ring sealing surface. This feature helps to
prevent the escape of liquid into the centrifuge chamber if tubes or
bottles leak during centrifugation.
The JLA-16.250 rotor is warranted for 7 years (see the
Specific information about the JLA-16.250 rotor is given here. Use
the Rotors and Tubes for J Series Centrifuges manual (publication
JR-IM), and the centrifuge instruction manual along with this manual
for complete rotor and accessory information.
NOTE
Although rotor components and accessories
made by other manufacturers may fit in the
JLA-16.250 rotor, their safety in this rotor
cannot be ascertained by Beckman Coulter.
Use of other manufacturers' components in the
JLA-16.250 rotor may void the rotor warranty
and should be prohibited by your laboratory
safety officer. Only the components and
accessories listed in this publication should be
used in this rotor.
1
to demonstrate
).
WARRANTY