Power Connection; Projector Components; Front View - Christie HS Series User Manual

Power connection

The projector uses an AC power system that allows the projector to operate at full brightness with a
power supply of 120-240 VAC or 200-240 VAC, depending on the models and regions. Operating the
device outside of the voltage range may cause unsatisfactory operation or damage to the projector.
Christie recommends a 20 A rated wall breaker for the installation. To ensure safety operation, only
use the AC power cord provided with the product or recommended by Christie.
Model name
D20WU-HS/D20HD-HS
D16WU-HS/D16HD-HS

Projector components

Identify the main components of the projector.

Front view

Identify the main components on the front of the projector.
ID Part name
1 Front IR sensors
2 Projection lens
3 Adjustable feet
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Power requirements
200-240 VAC, 50/60 Hz, 9 A
120-240 VAC, 50/60 Hz, 12 A
200-240 VAC, 50/60 Hz, 7 A (rated for China, India, Taiwan, and Korea)
200 VAC, 50/60 Hz, 7 A, 1250 W (rated for Japan)
Description
Receives signals from the IR remote keypad. Keep the signal path to the
sensor unobstructed for uninterrupted communication with the projector.
Allows automated lens control and adjustment: vertical and horizontal
offsets, zoom, and focus.
Raises or lowers the feet to level the projector.
1
2
3
Introduction
17