Diagnostic Tools; Viewing Projector Information; Selecting A Test Pattern - Christie HS Series User Manual

Hide thumbs Also See for HS Series:

Table of Contents

Diagnostic tools

Follow these procedures to help diagnose issues with HS series D16-20 projectors.

View the status of the projector, source information, light source information, and communication

information. The information is read-only.

1. To view the status of the projector, such as model name, serial number, and so on, select Menu

> Information > Status Info.

2. To view source information, such as signal format, resolution, and so on, select Menu >

Information > Source Info.

3. To view the communication information, such as projector's IP address, subnet, and so on,

select Menu > Information > Communications Info.

4. To view the light source information, such as total projector hours and laser diode (LD) hours,

select Menu > Information > Light Source Info.

5. To view the firmware information, such as software version, LAN version, and so on, select

Menu > Information > Firmware Version Info.

Use the projector's test patterns to assist with configuration of the projector and to diagnose any

issues that may occur.

1. Select Test Pattern on remote control.

You can also select the test patterns from Menu > Test Pattern.

2. Scroll through the list of test patterns by left and right arrow keys on remote control.

3. Select the required test pattern.

4. To confirm your selection, press ENTER.

HS Series D16-20 User Manual

020-001466-01 Rev. 1 (10-2018)

Table of Contents

D16wu-hs D20hd-hs D16hd-hs D20wu-hs