Adjusting The Image Sharpness; Setting Up 3D Display; Setting 3D Format - Christie HS Series User Manual
Hide thumbs
Also See for HS Series:
- Service manual (112 pages) ,
- User manual (73 pages) ,
- Product safety manual (57 pages)
Table of Contents
Advertisement
•
RGB Full
•
RGB Limited
•
YUV
•
REC709
•
REC601
4. To confirm the selection, press ENTER.
Adjusting the image sharpness
Adjust the edge clarity of the image.
1. Select Menu > Image Settings > Detail.
2. Select the sharpness:
•
Maximum
•
High
•
Normal
•
Low
•
Minimum
3. To confirm the selection, press ENTER.
Setting up 3D display
Use the functions in 3D Display menu to make the timing adjustment and environment necessary
for displaying 3D images.
Setting 3D format
Set up the 3D format according to the 3D input signal.
1. Select Menu > Image Settings > 3D Display > 3D Enable.
2. Select the appropriate 3D format:
•
Auto
•
Frame Packing
•
Side by Side
•
Top and Bottom
•
Frame Sequential
•
Off
3. To confirm the selection, press ENTER.
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
34
Advertisement
Table of Contents
