Changing The Splash Screen; Setting Up Password Protection; Changing Password - Christie HS Series User Manual

Changing the splash screen

Select splash screen which is the screen with no source is displayed.
1. Select Menu > Configuration > Menu Preferences > Splash Screen Setup.
2. Select the appropriate splash screen:
• Factory Logo
• Blue
• Black
• White
3. Press ENTER.

Setting up password protection

Protect your projector with a password. Once enabled, you must enter the password before you can
project an image.
1. Select Menu > Configuration > Menu Preferences > PIN Protect.
2. Enter a password by number keys.
3. To confirm the password, select OK.

Changing password

Change the current password to a new password.
1. Select Menu > Configuration > Menu Preferences > Change PIN.
2. Enter current password by number keys.
3. Select OK.
4. Enter new password by number keys.
5. Select OK.
6. To confirm the password, enter new password again by number keys.
7. Select OK.
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Configuring system settings
48