Product Documentation; Related Documentation; Site Requirements; Physical Operating Environment - Christie HS Series User Manual

Product documentation

For installation, setup, and user information, see the product documentation available on the
Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this
product.
1. Access the documentation from the Christie website:
• Go to this URL: http://bit.ly/2JtghsE or
https://www.christiedigital.com/en-us/business/products/projectors/1-chip-dlp/hs-series
• Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.

Related documentation

Additional information on the projector is available in the following documents.
• HS Series D16-20 Installation and Setup Guide (P/N: 020-001464-XX)
• HS Series D16-20 Product Safety Guide (P/N: 020-001465-XX)
• HS Series D16-20 User Manual (P/N: 020-001466-XX)
• HS Series D16-20 Specification Guide (P/N: 020-001467-XX)
• HS Series D16-20 Service Manual (P/N: 020-001468-XX)
• Twist User Guide (P/N: 020-101380-XX)

Site requirements

To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.

Physical operating environment

Provides specifications for the operating environment.
• Ambient temperature (operating): 0°C to 40°C (32°F to 104°F ) up to 2500 ft
• Humidity (non-condensing): 10% to 85% RH
• Operating altitude: 10,000 ft maximum at 0°C to 30°C ambient temperature
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Introduction
16