Locking The Lens Motor; Resetting The Lens To Home Position; Selecting Screen Image Orientation - Christie HS Series User Manual

Hide thumbs Also See for HS Series:

Table of Contents

4. To confirm the selection, press ENTER.

Locking the lens motor

Prevent all lens motors from moving. It disables the zoom, focus, and offset settings, locking out

any changes and overriding all other lens features. This feature prevents accidental lens position

changes in multiple projectors installations.

1. Select Menu > Configuration > Lens Settings > Lock all Lens Motors.

2. To enable locking of all lens motors, select Locked.

3. To unlock all lens motors, select Allow.

Set the lens offset back to the home position.

1. Press LENS on keypad or LENS H/LENS V on remote control.

2. You can also select Menu > Configuration > Lens Settings > Lens Calibration.

3. To start the lens calibration, press ENTER.

4. To confirm the selection, select OK.

Specify the orientation to use for the image. The projector supports front projection, rear

projection, front projection inverted, or rear projection inverted.

1. To invert the projection image, select Menu > Configuration > Ceiling Mount.

2. Select appropriate ceiling mount settings:

•

Auto—Detect the orientation automatically.

•

Off—Disable the ceiling mount setting.

•

On—Enable the ceiling mount setting.

3. To confirm the image orientation, press ENTER.

4. To do a rear projection, select Menu > Configuration > Rear Projection.

5. To swap, press ENTER.

HS Series D16-20 User Manual

020-001466-01 Rev. 1 (10-2018)

Configuring system settings

Table of Contents

D16wu-hs D20hd-hs D16hd-hs D20wu-hs