Applying The Saved Blend File - Christie HS Series User Manual

5. To save the blend settings, from the Twist menu, click File > Save.
• Twist can save up to four warp and blend files, among which one configuration can be
saved on the projector. Record 1 of the warp memory on the projector is reserved for
Twist settings.
• When removing the projector from Twist, or closing the program, the projector
automatically saves the currently applied settings.
6. Repeat step 2 to 5 for the remaining projectors.
For multiple projectors, use Twist to identify the projectors.

Applying the saved blend file

You can apply the saved blend file from Twist interface or use the projector's on-screen display
(OSD) menus to apply the blend settings saved on the projector.
Apply a saved blend file from Twist:
1. From the Twist menu, click File > Blend/Mask/B.U.
2. In the Download Blend dialog, select the required record.
3. To download the selected blend file, click OK.
4. To send the blend settings to the projector, on the canvas, right-click a projector window and
select Send Blend.
Apply a saved blend file on the projector:
1. From the on-screen display (OSD) menu, select Menu > Size & Position > Geometry
Correction > Warp Memory > Apply Warp.
2. Select Record 1.
3. To apply the selected blend settings, press ENTER.
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image size and position
32