Parameter Object; Class Code 0X000F - Allen-Bradley ArmorStart 290E User Manual

Appendix B CIP Information

Parameter Object

Attribute ID Access Rule
1 Get
2 Get
8 Get
9 Get
Attribute ID Access Rule
1 Get/Set
2 Get
3 Get
4 Get
5 Get
6 Get
7 Get
8 Get
9 Get
10 Get
11 Get
12 Get
13 Get
14 Get
15 Get
16 Get
212
The following common services will be implemented for the Analog Output
Point Object:
Service Code
0x0E
0x10

CLASS CODE 0x000F

The following class attributes will be supported for the Parameter Object:
Name
Revision
Max Instance
Parameter Class Descriptor
Configuration Assembly Instance
The number of instances of the parameter object will depend upon the type of
Distributed Starter that the control board is connected to.
The following instance attributes will be implemented for all parameter
attributes:
Name
Value Specified in Descriptor
Link Path Size USINT
Array of:
Link Path
Descriptor WORD
Data Type EPATH
Data Size USINT
Parameter Name String SHORT_STRING
Units String SHORT_STRING
Help String SHORT_STRING
Minimum Value Specified in Descriptor
Maximum Value Specified in Descriptor
Default Value Specified in Descriptor
Scaling Multiplier UINT
Scaling Divisor UINT
Scaling Base UINT
Scaling Offset INT
Rockwell Automation Publication 290E-UM001B-EN-P - June 2012
Implemented for:
Class Instance
Yes Yes
No Yes
Data Type
UINT
UINT
WORD
UINT
Data Type
BYTE
EPATH
Service Name
Get_Attribute_Single
Set_Attribute_Single
Value
—
—
—
100 for Bulletin 290E/291E units
101 for Bulletin 294E units
Value
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—