Allen-Bradley ArmorStart 290E User Manual page 220

Appendix B CIP Information
220
Table 33 - Fault Codes, Fault Text, and Fault Help Strings for DOL and Reversers
Fault
Code Fault Text
14 Under Power Trip
15 Sensor Short
16 Output Short
17 Fault 17
18 Fault 18
19 Phase Imbalance
20 Fault 20
21 Aux Power Loss
22 Fault 22
23 Fault 23
24 Fault 24
25 Fault 25
26 Fault 26
27 NonVol Memory
28 Fault 28
29 Fault 29
30 Hardware Fault
31 Fault 31
32 Fault 32
33 Fault 33
34 Fault 34
35 Fault 35
36 Fault 36
37 Fault 37
38 Fault 38
39 Fault 39
40 Unknown Fault
The table below lists Fault Codes, Fault Text, and Fault Help Strings for Drive
units.
Table 34 - Fault Codes, Fault Text, and Fault Help Strings for Drive Units
Fault
Code Fault Text
1 Fault 1
2 User Defined
3 Motor Overload
4 Drive Overload
Rockwell Automation Publication 290E-UM001B-EN-P - June 2012
Help Text
Indicates the internal power supply is below its working level.
Available in units with Integrated Power Supply only
Flags a miswired hardware input point.
Flags a miswired hardware output point.
—
—
Indicates an imbalanced phase current.
—
Auxiliary Power was lost or dipped below the minimum threshold.
Not available in units with Integrated Power Supply
—
—
—
—
—
This is a major fault which renders the unit inoperable.
—
—
This is a major fault which renders the unit inoperable.
—
—
—
—
—
—
—
—
—
—
Help Text
—
User defined trip has occurred.
The load has drawn excessive current.
150% load for 1 min. or 200% load for 3 sec. exceeded.
PF4M
Fault
Code
7
64