Allen-Bradley ArmorStart 290E User Manual page 177

EtherNet/IP
Web Server
Network Connections
Communication Ratings
EtherNet/IP ODVA - Conformance Testing
Ethernet Communication Rate
Ethernet Ports
Ethernet Network Topologies Supported
Device Level Ring Support
Ethernet Connector
Ethernet Cable
IP Configuration
DHCP Timeout
Data
Packet Rate (pps)
Consume Instance (Command)
Produce Instance (Status)
Message Support
Address Conflict Detection (ACD)
Sockets
Security
E-mail
Webpage Features
Concurrent Sessions
Web Server
Concurrent TCP Connections
Maximum I/O Connections (CIP Class 1)
Maximum Concurrent Explicit Messages (CIP Class 3)
Class 1 Connection API
Class 3 Connection API
Request Packet Interval (RPI)
Rockwell Automation Publication 290E-UM001B-EN-P - June 2012
Specifications
EtherNet/IP Interoperability Performance – Per A9 PF 2.1
10/100 Mbps, half or full-duplex
2 (embedded switch)
Star, Tree, Linear, and Ring
Beacon Performance, IEEE 1583 Transparent Clock
M12, D code, female, with Ethernet keying, 4 Pin
Category 5e: Shielded or unshielded
Static, DHCP, or BootP
30 s
Transported over both TCP and UDP
500 packets-per-second (2000 μs), Tx
500 packets-per-second (2000 μs), Rx
Default of 4 words (Instance 154)
Default of 16 words (Instance 156)
Unicast or Multicast
IP v4 Address Conflict Detection for EtherNet/IP devices
150 maximum
Login and password configurable
Support Simple Mail Transfer Protocol (SMTP)
Status, diagnostics, configuration
20
HTTP 1.1
Maximum of 5 encapsulated messages over both TCP and UDP
Supports up to 2 Class 1 CIP connections [Exclusive owner (data) or
listen-only]. One connection per PLC. Listen-only connection
requires a data connection to be established.
6
2...3200 ms
100...10 000 ms
20 ms default (2 ms minimum)
Chapter 6
177