Allen-Bradley ArmorStart 290E User Manual page 219

Attribute ID Access Rule
0 Get Full/All Info
1 Get Basic Info
3 Get Help Text
Four instances of the DPI Fault Object will be supported.
Name
Struct of:
Fault Code
Fault Source
DPI Port Number
Device Object Instance
Fault Text
Fault Time Stamp
Timer Value
Timer Descriptor
Help Object Instance
Fault Data Array [5] of 32 bit fault data
values
Struct of:
Fault Code
Fault Source
DPI Port Number
Device Object Instance
Fault Time Stamp
Timer Value
Timer Descriptor
STRING
The following common services will be implemented for the DPI Fault Object.
Service Code
0x0E
0x10
The table below lists Fault Codes, Fault Text, and Fault Help Strings for DOL
and Reversers.
Table 33 - Fault Codes, Fault Text, and Fault Help Strings for DOL and Reversers
Fault
Code Fault Text
1 Fault 1
2 User Defined
3 Overload Trip
4 Fault 4
5 Phase Loss Trip
6 Jam Trip
7 Underload Trip
8 Fault 8
9 Fault 9
10 Fault 10
11 Fault 11
12 Stall Trip
13 Switched Power
Rockwell Automation Publication 290E-UM001B-EN-P - June 2012
Data Type
UINT See Tables below
Struct of:
USINT 0
USINT
BYTE [16] See Tables below
Struct of:
ULDINT
WORD
USINT
Snapshot data
UINT See Tables below
Struct of:
USINT 0
USINT
Struct of:
ULINT
WORD
See Tables below
Implemented for:
Class Instance
Yes Yes
Yes No
User defined trip has occurred.
Load has drawn excessive current based on trip class selected.
Indicates missing supply phase. This fault can be disabled.
Motor current above jam level for more than jam trip delay time.
Motor current below UL level for more than UL trip delay time.
Motor current above stall trip level during motor starting.
Indicates the loss of switched control power.
Not available in units with Integrated Power Supply.
CIP Information Appendix B
Value
Service Name
Get_Attribute_Single
Set_Attribute_Single
Help Text
—
—
—
—
—
—
219